Standardized QCI Values and their Characteristics

QCI values, with their corresponding characteristics, have been standardised in 3GPP to ensure that all bearers assigned a given QCI receive the same minimum level of QoS between the UE and the Policy and Charging Enforcement Function (PCEF), regardless of vendor (for eNodeB, S-GW and P-GW). This also ensures that a roaming UE's traffic receives predictable treatment even when served by a different operator's network.

The standardized QCI characteristics Priority, Packet Delay Budget and Packet loss rate(3GPP TS 23.203) are described in the table 1 below. The standardized characteristics are not sent over any interface. Instead, they serve as guidelines that vendors use to pre-configure node-specific parameters for each QCI. For example, the eNodeB will have to be configured to ensure that traffic belonging to a bearer with a certain standardized QCI receives the appropriate QoS treatment.

Table 1: Standardized QCI Characteristics
QCI Resource Type Priority Packet Delay
Budget
Packet Error
Loss Rate
Example Services
1 GBR 2 100 ms 10−2 Conversational voice
2 4 150 ms 10−3 Conversational video (live streaming)
3 3 50 ms 10−3 Real-time gaming
4 5 300 ms 10−6 Non-conversational video (buffered streaming)
65 0.7 75 ms 10−2 Mission Critical user plane Push To Talk voice (e.g., MCPTT)
66 2 100 ms 10−2 Non-Mission-Critical user plane Push To Talk voice
5 Non-GBR 1 100 ms 10−6 IMS signalling
6 6 300 ms 10−6 Video (buffered streaming), TCP-based (www, e-mail, chat, ftp, p2p file sharing, progressive video, etc.)
7 7 100 ms 10−3 Voice, video (live streaming), interactive gaming
8 8 300 ms 10−6 Video (buffered streaming), TCP-based (www, e-mail, chat, ftp, p2p file sharing, progressive video, etc.)
9 9 300 ms 10−6 Video (buffered streaming), TCP-based (www, e-mail, chat, ftp, p2p file sharing, progressive video, etc.)
69 0.5 60 ms 10−6 Mission Critical delay sensitive signalling (e.g., MC-PTT signalling)
70 5.5 200 ms 10−6 Mission Critical Data (e.g. example services are the same as QCI 6/8/9)

Priority level defines traffic priority, with level 1 being highest priority. The Packet Delay Budget is an upper bound for the time that a packet may be delayed between the UE and the PCEF. The Packet Error Loss Rate is as a bound for the rate of packet losses. The QCI values 1–4 are allocated for traffic that requires dedicated resource allocation for a GBR, while values 5–9 are allocated to non-GBR bearers.

Apart from these standardized QCIs, non-standardized QCIs may also be used by the operator and/or vendors . In that case the operators and/or vendors define what node-specific parameters are used for a given QCI.

Reference:
[1] 3GPP TS 23.203, “Policy and charging control architecture,” 3rd Generation Partnership Project (3GPP).

Leave a Reply

Your email address will not be published. Required fields are marked *