Standardized QCI Values and their Characteristics
QCI values, with their corresponding characteristics, have been standardised in 3GPP to ensure that all bearers assigned a given QCI receive the same minimum level of QoS between the UE and the Policy and Charging Enforcement Function (PCEF), regardless of vendor (for eNodeB, S-GW and P-GW). This also ensures that a roaming UE's traffic receives predictable treatment even when served by a different operator's network.
The standardized QCI characteristics Priority, Packet Delay Budget and Packet loss rate(3GPP TS 23.203) are described in the table 1 below. The standardized characteristics are not sent over any interface. Instead, they serve as guidelines that vendors use to pre-configure node-specific parameters for each QCI. For example, the eNodeB will have to be configured to ensure that traffic belonging to a bearer with a certain standardized QCI receives the appropriate QoS treatment.
| QCI | Resource Type | Priority | Packet Delay Budget |
Packet Error Loss Rate |
Example Services |
|---|---|---|---|---|---|
| 1 | GBR | 2 | 100 ms | 10−2 | Conversational voice |
| 2 | 4 | 150 ms | 10−3 | Conversational video (live streaming) | |
| 3 | 3 | 50 ms | 10−3 | Real-time gaming | |
| 4 | 5 | 300 ms | 10−6 | Non-conversational video (buffered streaming) | |
| 65 | 0.7 | 75 ms | 10−2 | Mission Critical user plane Push To Talk voice (e.g., MCPTT) | |
| 66 | 2 | 100 ms | 10−2 | Non-Mission-Critical user plane Push To Talk voice | |
| 5 | Non-GBR | 1 | 100 ms | 10−6 | IMS signalling |
| 6 | 6 | 300 ms | 10−6 | Video (buffered streaming), TCP-based (www, e-mail, chat, ftp, p2p file sharing, progressive video, etc.) | |
| 7 | 7 | 100 ms | 10−3 | Voice, video (live streaming), interactive gaming | |
| 8 | 8 | 300 ms | 10−6 | Video (buffered streaming), TCP-based (www, e-mail, chat, ftp, p2p file sharing, progressive video, etc.) | |
| 9 | 9 | 300 ms | 10−6 | Video (buffered streaming), TCP-based (www, e-mail, chat, ftp, p2p file sharing, progressive video, etc.) | |
| 69 | 0.5 | 60 ms | 10−6 | Mission Critical delay sensitive signalling (e.g., MC-PTT signalling) | |
| 70 | 5.5 | 200 ms | 10−6 | Mission Critical Data (e.g. example services are the same as QCI 6/8/9) |
Priority level defines traffic priority, with level 1 being highest priority. The Packet Delay Budget is an upper bound for the time that a packet may be delayed between the UE and the PCEF. The Packet Error Loss Rate is as a bound for the rate of packet losses. The QCI values 1–4 are allocated for traffic that requires dedicated resource allocation for a GBR, while values 5–9 are allocated to non-GBR bearers.
Apart from these standardized QCIs, non-standardized QCIs may also be used by the operator and/or vendors . In that case the operators and/or vendors define what node-specific parameters are used for a given QCI.
[1] 3GPP TS 23.203, “Policy and charging control architecture,” 3rd Generation Partnership Project (3GPP).