IMS PDN Connection and Default Bearer Establishment
For each PDN connection, at least one bearer, known as the default bearer, is established. For a VoLTE user the default bearer carries all control plane (signalling) traffic coming to/from the IMS APN. During default bearer establishment, the P-GW allocates one or more IP addresses for the PDN connection. The default bearer parameters are derived from the PDN subscription context stored in the HSS.
The P-GW allocates IP addresses for IPv4 and IPv6 PDN types. A UE supporting IPv6 requests an IPv4v6 PDN connection. During default bearer establishment, the network provides a complete IPv4 address and a globally unique /64 IPv6 prefix. The UE then generates the full IPv6 address using IPv6 stateless address autoconfiguration.
The UE requests the address of the Proxy Call Session Control Function (P-CSCF) through the Protocol Configuration Options (PCO) information element included in the PDN Connectivity Request message. The P-GW may then provide one or more IPv4 and/or IPv6 P-CSCF addresses in the PDN Connectivity Response message. When both address types are available, the UE shall prefer the IPv6 P-CSCF address.
During PDN connection establishment, the P-GW interacts with the PCRF for bearer authorization and policy control for establishing a PDN connection towards the IMS APN, when it is initiated by the UE through a PDN Connectivity Request message.
As part of this procedure, the P-GW establishes a Diameter session with the PCRF over the Gx interface. The information sent to the PCRF includes the user identity, the UE IPv4 address and/or IPv6 prefix, the IP-CAN type, and the radio access type. Additional information, such as the UE time zone and PDN-related information, may also be included.
The PCRF may use subscriber-specific policy information obtained from an SPR or another subscriber database. Alternatively, it may apply common policy rules, for example based on the APN. The PCRF can provide PCC rules, bearer authorization, and QoS parameters for the PDN connection, including QCI, non-GBR QoS, and Allocation and Retention Priority (ARP). The established Diameter session can subsequently be used for dynamic PCC handling during voice call establishment.
At the same time, the P-GW may also interact with the charging system to perform charging for the user’s PDN connection. Since VoLTE signalling and media traffic are carried over the IMS APN, APN-based charging with an associated charging identifier is sufficient.
As part of default bearer establishment, the MME also initiates radio access bearer (RAB) establishment. The MME sends the bearer parameters to the eNodeB to establish the radio bearer between the UE and the eNodeB.