VoLTE-Related UE Capabilities and FGI Support

Support for VoLTE requires certain UE capabilities that were not necessary during the early LTE deployment phase, when networks primarily focused on data services. To address this, 3GPP introduced the Feature Group Indicator (FGI) mechanism in TS 36.331 for these and several other capabilities.

FGIs are intended to be enabled only after the corresponding features have been verified against network implementations. This provides network operators with confidence that a UE claiming support for a particular feature can reliably operate with that feature in live networks. The approach also minimizes the risk for UE vendors of deploying devices with insufficiently tested capabilities that could lead to interoperability issues or feature failures when activated in the network.

For VoLTE-specific functionality, the following features are considered important:

  • Support for Radio Link Control (RLC) Unacknowledged Mode (UM)

In LTE, point-to-point data transmission already benefits from physical layer retransmissions. Consequently, RLC UM is primarily required for packet reordering rather than retransmission. In contrast, RLC Acknowledged Mode (AM) provides retransmissions at the RLC layer when physical layer retransmissions are unsuccessful.

  • TTI Bundling

TTI bundling is controlled through a dedicated FGI bit. Although there have been proposals within 3GPP to mandate support for all Release 9 devices, such requirements are expected to be implemented only in later releases. The separate FGI indication also simplifies deployment and interoperability management.

  • Semi-Persistent Scheduling (SPS)

SPS also has a dedicated FGI bit, although support has not yet been mandated. SPS offers significant efficiency benefits when a large proportion of traffic consists of voice services. However, since early LTE deployments were predominantly data-oriented, SPS support was not considered critical during the initial deployment phase.

  • SR-VCC-Related Handovers

SR-VCC handovers to GSM, UMTS, and CDMA networks each have separate FGI bits. Packet-switched (PS) handover to UMTS is mandatory, and the corresponding FGI bit is generally expected to be set to true, as sufficient interoperability testing has been completed.

  • Long DRX Support

Long Discontinuous Reception (DRX) enables significant UE battery savings and is important not only for voice services but also for battery-powered handheld devices in general. Support for long DRX is now commonly assumed in modern devices.

  • CSFB Support

For CSFB operation, the LTE measurement events associated with GSM, UMTS, or CDMA FGI bits are mandated for UEs supporting CSFB toward the respective radio access technology.

Leave a Reply

Your email address will not be published. Required fields are marked *