VoLTE Subscription Parameters and UE Configuration
VoLTE subscription is permanently stored in HSS and necessary information of it is downloaded to MME when UE performs EPS attach and to a S-CSCF when the user performs IMS attach. Table 1 shows the evolved packet core (EPC) part of the VoLTE subscription data. Table 2 shows the IMS part of the VoLTE subscription data.
The communication service provider can provision the subscriber’s voice domain preference in the UE through device management procedures. The voice domain preference defines how a UE that supports both Circuit Switched Fallback (CSFB) and IMS/VoLTE handles voice communication services. Four different preference values are defined in 3GPP TS 23.221, as shown in Table 3.
Hence, it is assumed that the VoLTE UE is configured with the preference setting “IMS PS voice preferred, CS voice as secondary”. Furthermore, it is assumed that the VoLTE UE operates in voice-centric mode, which may be configured by the manufacturer or the end user. Voice-centric behaviour means that the UE always attempts to ensure the availability of voice services. Therefore, if the UE determines that neither IMS voice nor Circuit Switched Fallback (CSFB) is supported, it disables LTE capability and reselects another radio access network such as GSM/EDGE Radio Access Network (GERAN) or UMTS Terrestrial Radio Access Network (UTRAN). In addition, the communication service provider may configure the preferred domain for Short Message Service (SMS), for example whether SMS over IP is used.
Table -1 (EPC-VoLTE Subscription Parameters)
| Parameter | Purpose | Example Value / Content |
|---|---|---|
| IMSI | A unique International Mobile Subscription Identity (IMSI) allocated to each mobile subscriber in the GSM/UMTS/EPS system. It is also used to retrieve subscription data from HSS. | Maximum length 15 digits, comprising Mobile Country Code (MCC) – 3 digits, Mobile Network Code (MNC) – 2 or 3 digits, and Mobile Subscriber Identification Number (MSIN). Example: 40445XXXXXXXXX |
| APN-configuration-profile | Contains one or more APN configurations subscribed by the user, with one APN marked as the default APN. | |
| APN-configuration | Describes the configuration for a single APN such as IMS APN. | |
| PDN-type | Indicates the address type of the PDN when it is IP-based. | IPv4 (0), IPv6 (1), both IPv4 and IPv6 (dual-stack usage) (2), IPv4 or IPv6 (3) |
| Service-selection | APN Network Identifier (i.e. an APN without the Operator Identifier) or wildcard value. | ims is Network Identifier in ims.mnc045.mcc404.gprs |
| EPS-subscribed-QoS profile | Contains bearer-level QoS parameters (QoS Class Identifier and Allocation Retention Priority) associated with the default bearer for an APN. | 5 (QCI5), ARP9 |
| VPLMN-dynamic-address-allowed | For an APN, the UE is always permitted to use a PDN Gateway (PDN GW) located in the Home PLMN (HPLMN). This parameter indicates whether the UE is also permitted to use PDN GWs located in the Visited PLMN (VPLMN). | Not Allowed (0), Allowed (1) |
| AMBR | Aggregate Maximum Bit Rate (AMBR) uplink/downlink per APN. | 500000 / 1000000 (uplink/downlink) bits per second |
| Subscriber-status | Indicates whether service is granted or barred. | 0 (service granted), 1 (operator determined barring) |
| Network-access-mode | Indicates network access mode: PACKET_AND_CIRCUIT (0), Reserved (1), ONLY_PACKET (2). | 0 (packet and circuit services enabled) |
| MSISDN | Number uniquely identifying a subscription in a PLMN. | 9198xxxxxxxx |
| STN-SR | Identifies the Session Transfer Number for SRVCC. Removal of this parameter may deactivate SRVCC service in the serving PLMN. | 9198yyyyyyyy |
| ICS-indicator | Indicates whether IMS Centralized Services (ICS) is provisioned. |
Table – 2 (IMS VoLTE Subscription Parameters)
| Parameter | Purpose | Example value/content |
|---|---|---|
| Private user identity | The Private User Identity (IMPI) is a unique IMS-internal subscriber identity used for authentication, authorization, and retrieval of subscription data within the IMS core network. | pvt_user1@sample.com |
| Charging function address information | Primary and secondary addresses of IMS charging entities used for offline billing and online credit-control procedures. | aaa://chargingentitysample.com |
| List of Visited Network Identifiers Authorized for IMS Roaming | Specifies the visited operator networks in which the subscriber is permitted to use IMS roaming services. | tsp1.net, tsp2.net, tsp3.net |
| Authentication Data | Contains the security credentials and authentication vectors required for IMS subscriber authentication. | Authentication Scheme (IMS AKA), Shared Secret, RAND, XRES, CK, IK, AUTN, SQN |
| Other basic IMS information | Additional IMS subscription and operational parameters associated with the subscriber. | Associated IMPIs, Associated Registered IMPIs, Loose-route indication, S-CSCF restoration information, Registration-related data |
| Service profile | A collection of subscriber-specific service information typically downloaded from HSS to S-CSCF. | |
| Core network service authorisation | Subscriber-specific authorization information that defines which IMS core network communication services and media capabilities the user is permitted to use. | |
| Media policy information | Defines the permitted media types and media-related authorization policies for the subscriber. | Permitted media types |
| IMS communication service identifier policy | A list of IMS Communication Service Identifiers (ICSIs) specifying which IMS communication services the subscriber is authorized to use. | |
| Public user identity | The user identity used for communication with other users and services in the IMS network (IMPU). | sip:abc@sample.com and tel:+9145xxxxxxxx |
| Initial Filter Criteria (iFC) | User-specific service triggering information used by the S-CSCF to determine when SIP requests should be routed to a particular Application Server (AS). | |
| Shared Initial Filter Criteria (Shared iFC) | Common service triggering information for multiple users containing a reference value to initial filter criteria locally administered and stored in the S-CSCF. |
Table – 3 (VoLTE UE Voice Domain Preference configuration values)
| Configuration Value | Purpose |
|---|---|
| CS voice only | UE uses only the circuit-switched domain for voice communication and does not attempt IMS/VoLTE voice sessions over packet-switched access. |
| CS voice preferred, IMS PS voice as secondary | If CS voice is available, the UE will use the CS domain to originate and terminate voice calls. IMS voice over packet-switched access is secondary. |
| IMS PS voice preferred, CS voice as secondary | If IMS voice is available, the UE will use IMS for voice sessions. CS voice is secondary. |
| IMS PS voice only | UE uses only IMS packet-switched voice services for voice communication and does not attempt circuit-switched voice calls. |